Under normal circumstances, as long as the quality of the sticker labels and the ribbon is good, the printing effect should be clear, but in some cases, the printing effect is not satisfactory, and it is not very clear. What should I do in such a situation?
In such a situation, the method should be to try to replace the sticker and carbon ribbon. If the printing is not clear enough, it may be that the quality of the sticker or the carbon ribbon is not good enough, resulting in poor printing effect. First, use a paper core tube to roll down multiple stickers and try printing to see how the printing effect is. If the printing effect is still not good, try to replace the barcode ribbon and see if the printing effect has changed significantly. , If the printing effect is still not clear enough after both are replaced, then there may be a problem with the print head or barcode printer settings.
If it is because of the barcode printer, you should first adjust the temperature of the print head of the barcode printer, and try to widen the temperature to see if the temperature of the print head caused by the disassembly and replacement of the ribbon is insufficient, which causes the ribbon to turn black and cannot rotate very well. Print the paper on the sticker; if the effect is still not good after adjusting the printing temperature, then there may be a problem with the print head, you need to disassemble and replace the printing engine, buy a replacement at home or take it to a repair shop for overhaul . sticker labels
Generally speaking, if the printing effect of the barcode printer is not clear enough, there are many reasons. It needs to be checked one by one and cleaned up one by one. Generally speaking, the possible reasons are the above points, which can be cleared by careful inspection.
