Many people have used label printer labels. I believe everyone will set up one label per row. It is very simple. So, can a row of 3 or more labels be printed? How to set it up?
Yes, learn the following set of formulas, let alone 3, as long as your paper can be put down, ten will be fine.
But you need to set it in the template at this time. If you follow the conventional method, there must be only one printed.
Since you don’t know the specific size of your label paper, first assume that your label paper is a 30x20 rounded rectangular coated paper label, then you cannot choose the size of 30x20 when setting the paper size.
Instead, choose a formula like this:
width
Among them, A represents the width of each label; N represents the number of label columns in each row; C represents the column spacing;
Some people may ask here, what does this 1.3 mean? In the standard coated paper, the porosity of the edge material is 1.3mm, which is designed to prevent the edge of the self-adhesive glue from sticking to the printer.
height is the actual height of each label
Bring in 30*20, a row of three columns of labels is
Therefore, when the size of the label template is 30*20, the size of the label paper you should set is: width 96.6mm, height 20mm
Up to here, it has already begun to take shape, but it is not finished yet. It is necessary to further set the column spacing. Manually select the spacing adjustment and enter the actual spacing size. The standard spacing is 2mm
After completing this step, you can click Finish directly. In the next preview interface, you will see a tabbed interface, but as long as you click multiple prints, it will automatically start to arrange and print.
